Search Results

CDS Analytical's cryo-mlll cryomill is a laboratory ball mill that is designed to homogenize polymer samples and microplastic samples cooled by liquid nitrogen. Home >> Products >> Pyrolysis >> Cryo-mill Pyrolysis Introduction Features Applications Parts & Options Downloads Cryo-mill Product Introduction Product Introduction Out of gallery Specifications: Grinding Technology: Max Frequency: Temperature Range: Capacity: Grinding Ball: Finish Powder (8 runs): Feed-in Sample Size: Weight: Dimension (W x H x D): Accessoires Included: Ball grinding, Vertical oscillation 70 Hz Liquid nitrogen (-196°C) 4 channel of 5 ml sample jar 9.6 mm zirconia 5 micron <8 mm 25 kg 260 mm x 470 mm x 380 mm Liquid nitrogen reservoir, metal tongs, 4X 5 ml titanium sample vessles, 5X 9.6 mm stainless steel grinding balls, sample rack and cover Summary A distinct advantage of analytical pyrolysis GC-MS (PY-GC-MS) in polymer analysis is a simplified sample preparation process by skipping the solvent extraction and concentration step. However, the challenging hurdle in the sample preparation for PY-GCMS is to homogenize the polymer samples, which would determine the reproducibility of the following sample runs. As the rule of thumb for PY-GC-MS, more homogenized samples would yield more reproducible data. Among various homogenizers, cryogenic ball mill has been proven to be a powerful tool in homogenizing thermally sensitive and elastic polymers. CDS Analytical has designed an economical and ready-to-use cryo-mill solution for such applications. Product Features Product Features Ball Grinding at -196 °C The CDS Analytical's cryo-mill adopts ball grinding technique and allows the sample to be pre-cooled by liquid nitrogen to -196 °C High Throughput The cryo-mill supports up to 4 sample jars. Each sample jar could host up to 5 grams of sample. Vertical Oscillation The cryo-mill could generate up to 70 Hz oscillation on the sample jar vertically to bring strong impact for effective sample grinding. 5 micron Final Fineness The sample jar could accommodate sample size less than 8 mm in diameter, and yield a final fineness up to 5 micron. Built-in Method The cryo-mill has a user-friendly interface with built-in method designed for Py-GC-MS applications. Safety First The cryo-mill has multiple safety features built-in, including an automated locking mechanism when the cryo-mill is not balanced. Applications Applications 277 Quantitative Analysis of Microplastics in Shellfish using Pyrolysis-GC-MS This application note demonstrates sample preparation, detection and quantification of six different microplastics in shellfish using... Parts & Options Parts&Options Description Part Number Instrument Cryo-mill for Polymers, ball grinding by impact and friction at liquid nitrogen temperature 6204-3023 Parts A set of 4x 5 ml titanium sample vessles with 6X 9.6 mm zirconia grinding balls 6201-3026 Parts & Options Downloads User Manual CDS Cryo-mill User Manual Request form for manuals and software Thanks for contacting CDS! Our specialist will contact you soon. Send Downloads Pyroprobe Series CDS 4000 CDS's most cost effective single temperature Pyroprobe. Read More CDS 6200 CDS's 6th Generation Pyroprobe with trapping capabilities for reactant gas apps. Read More CDS 6150 CDS's 6th Generation Pyroprobe with up to 10 programmed temperature steps. Read More DISC Module CDS's DISC module provides the easiest way to load your pyroloysis sample. Read More Autosampler Module CDS's autosampler module with Dynamic Loading to improve productivity for any 6000 series pyroprobe. Read More CDS HPR CDS's HPR Pyroprobe allows pyrolysis at elevated pressure with built-in reactor. Read More Photoprobe Photoprobe is a device that irradiates sample in the Drop In Sample Chamber with high intensity UV light Read More Cryo-mill CDS's cryo-mill is a laboratory ball mill that grinds polymer sample in liquid nitrogen temperature. Read More MSChrom Py-GC-MS Database Powerful Py-GC-MS data processing software and database Read More

high-throughput SPE four channle instrument Home >> Products >> Empore >> Empore Ez-Trace Introduction Features Applications Parts & Options Downloads Empore EZ-Trace Workstation Product Introduction Product Introduction Specifications: Application: Brand: Compatibility: Extraction Channels: Dimensions (LxWxH; mm): Weight (kg): SKU: Empore Catalog No.: Industries: Solid Phase Extraction Empore™ Empore 47 and 90mm disks, cartridges, and other vendors' disks and cartridges. 4 520x290x440 12 98-0604-0801-7 8000 Life Sciences Environmental Basic Research Summary Improved efficiency is gained, at a cost-effective price, by using this manual, vacuum-controlled SPE workstation The independent channel design allows users to perform up to 4 extractions simultaneously without cross-contamination Universal compatibility with all Empore disks and cartridges and other vendors' SPE products Precision flow rate control is perfect for high-throughput sampling for both small and large volume samples Environmentally friendly extraction is easily achieved by valves separating organic and aqueous waste collection Inert sample pathways ensure extracts are clean and free of contamination Product Features Product Features Four Channel Independent Design Up to 4 extractions can be performed simultaneously. The independent channels design ensures that each channel will not effect the others, preventing cross-contamination. Universal Compatibility The lure tip fitting at each extraction station make the EZ-Trace universally compatible. This is perfect for traditional SPE cartridges and the disk adapter assemblies included with the EZ-Trace. Easy Eluate and Waste Separation Each extraction station is equipped with a valve for easy switching between sample collection and waste removal. The flow can also be stopped with this valve to allow for solvent soaking steps. Simple Collection Design Each EZ-Trace unit comes with 4 standard 40mL collection vials and screw cap adapters. This simple design allows for easy setup and adaptive use of other types of collection vials. Precision Flow Control Equipped with a needle valve for both waste and elution flow, these valves allow for precision flow control. This feature makes the EZ-Trace perfect for both small and large volume samples. Separate Waste Collection This switching valve allows for separation of organic and aqueous waste streams. This environmentally friendly feature assists in proper disposal of each type of waste. Inert Sample Pathways Inert sample pathways made of PEEK, PTFE, and stainless steal prevent corrosion from organic solvents such as DCM. This extends the application range of the EZ-Trace and extends the lifetime of the parts. Easy Maintenance The simple flow design makes the EZ-Trace easy to maintain, clean, and replace components as needed. Clean Extracts Clean extracts are realized when using the EZ-Trace. This chromatogram shows a contamination-free separation of 132 total target molecules for the example application of EPA Method 525.3. Operation and Installation Videos EZ-Trace Installation and Setup EZ-Trace Operation Demo Applications 279 Applying Empore™ E3technology™ to Proteomic Sample Preparation This note describes several applications of E3technology™ for proteomic sample preparation, which include two major components, protein... 278 Evaluation of Empore™ C18 Spin Columns for Peptide Desalting and Proteomic Analysis This application note describes evaluation of spin columns packed with C18 Empore™ membrane to load and desalt peptides for the purpose... 276 Rapid Determination of Strontium in Water Using Empore Strontium Disk This application note establishes a rapid analysis method for Strontiumin in water in emergency situations. The 1.00 L water sample was... 273 Empore 8270 Disk Extracts 125 Semi-volatile Organic Compounds from Water Samples per EPA 8270 The application note developed a new EPA 8270E method by using CDS Empore 8270 disk to maximizes the advantages of the membrane... 272 Eval. of Sample Loading Amount for 4 Types of StageTips on Total Number of Protein Identities The Empore™ StageTips product was developed utilizing the Empore™ membrane solid phase extraction (SPE) product to address the need for... 264 Extraction of Illicit Drugs from Wastewater using Empore Syringe-type Membrane SPE Cartridge 1 2 3 4 Applications Description Part Number Empore 8000 EZ-Trace SPE Workstation 98-0604-0801-7 1/8" PEEK tubing 2450-0188 Tee connector, 10/PK 98-0604-0813-5 3/8" barb fitting, 10/PK 98-0604-0812-3 1/4" tube connector, 10/PK 98-0604-0811-1 White rubber tube, 1/8" x 14m 98-0604-0810-2 1/8" PTFE tube 98-0604-0809-4 Collection vial adapter, 10/PK 98-0604-0808-6 Plastic clamp No. 19 for collection vials, 10/PK 98-0604-0807-8 Collection vial with screw-neck cap, 40 mL, 100/PK 98-0604-0806-0 Organic waste bottle adapter, 1/EA 98-0604-0805-9 Organic waste bottle, 1 L, 1/EA 98-0604-0804-1 Aqueous waste tank, 20 gallon, 1/EA 98-0604-0803-3 VP50 vacuum Pump, 0.085MPa, 50 L/min, 1/EA 98-0604-0802-5 Downloads Marketing Brochures Empore EZ-Trace Brochure Request form for more information Thanks for contacting CDS! Our specialist will contact you soon. Send Empore Products Empore Disk 47 and 90 mm disks with C18, C8, SDB-XC, SDB-RPS, Oil & Grease and Activated Carbon Read More Empore Cartridge 1, 3, and 6 mL cartridges with minimum elution volume Read More Empore 96-well Plate 96-well plate with 1.2 and 2.5 ml well volume Read More Empore EZ-Trace Four channel high-throughput SPE equipment Read More Empore StageTips SPE Micropipette Tips with C18, C8, SDB-XC, SDB-RPS, SAX, SCX Read More Empore Spin Column For small-volume desalting and fractionation of peptides and proteins Read More E3technology Efficient, effective, and economical approach for proteomics sample preparation (protein cleanup and digestion) with various format Read More

2nd Generation rotary evaporator with motor lifting Home >> Products >> Digestion Block >> ED36S Digestion Blocks Introduction Features Applications Parts & Options Downloads ED36S Product Introduction Product Introduction Specifications: Max Temperature Temp. Control Accuracy Heating Power Sample Tubes Sample Tube Volume Digestion Hole ID Digestion Hole Depth Heating Material Dimensions (L×W×H) cm Weight (kg) Power Supply 210°C ± 0.2°C 1400W 36 50 mL 31 mm 50 mm Al/PTFE 42×42x19 25 230V, 50/60Hz Summary The LabTech ED36S DigiBlock digestion block has a maximum temperature of 210°C with precise temperature control to support a variety of lab applications. The Al / PTFE coated heating surface heats samples evenly and is chemically resistant to ensure a long lifetime in the lab. Product Features EPA Compliant Complies with the highest standards of the US EPA methods including 200.9, 365.1, 3010A, 3020B, 3050B, and 3060. Uniform Heating Surface The Al heating block heats samples evenly for improved reproducibility. Precise Temperature Control PID regulated, precise temperature control within ± 0.2°C . High Efficiency The integrated circular heating design minimizes radiant heat loss to reduce energy usage by 75%. Chemically Resistant The Al alloy heating block is PTFE-coated for easy cleaning and chemically resistant to extend operating lifetime. Flexibility Sample tubes are available in various volume and materials, including polypropylene, PFA, glass, and PTFE. Product Features Max Temperature Temp. Control Accuracy Sample Tubes Sample Tube Volume Digestion Hole ID Digestion Hole Depth Power Supply ED36S 210°C ± 0.2°C 36 50 mL 31 mm 50 mm 230V, 50/60Hz HotBlock SC100-240 150°C ± 1.5°C 36 50 mL not provided 38 mm 230V, 50/60Hz Applications Microwave acid dry and pretreatment Fast heating digestion of food, biological samples, waste water, soils, cosmetics, medicine, etc Applications Parts & Options Category Part Number Description Consumable GC-36-L Capped Digestion Vessel : Glass/50ml/180mmH Consumable GC-36-M Capped Digestion Vessel : Glass/50ml/155mmH Consumable GC-36-S Capped Digestion Vessel: Glass/50ml/130mmH Consumable SC-36 Screw Cap Digestion Vessel: Polypropylene/50ml Consumable TF-36 Digestion Vessel with reflux cap: PTFE/50ml Consumable PF-60 Screw Cap Digestion Vessel: PFA/50ml Option BKT-36N Cold Rolling Steel Plate with Teflon coating Parts & Options Downloads Downloads Marketing Brochures Digestion Block Brochure Request form for manuals Thanks for contacting CDS! Our specialist will contact you soon. Send DISC Module CDS's DISC module provides the easiest way to load your pyroloysis sample. Read More Family Series ED16S The most cost effective digestion block solution for labs with lower sample throughput. Read More ED36S Robust digestion block for routine lab applications for labs with higher sampling requirements. Read More EHD36S EPA compliant digestion block for high temperature applications, including TN/TP. Read More EHD20 EPA compliant digestion block for high temperature applications, including TN/TP, for labs with lower sampling requirements. Read More ED54S Robust, anti-corrosion digestion block for lab with high sample throughput. Read More

CDS's 2nd generation Purge and Trap autosampler with dynamic headspace module. 关于公司 产品线 产品市场及应用 技术支持 立即订阅 Home >> Products >> Purge & Trap >> CDS 7450 吹扫捕集 产品介绍 产品特点 应用 零配件 下载 CDS 7450 产品介绍 样品工位： 采样量： 内标体积： 样品管路： 水模式： 土壤模式： 土壤加热温度： 磁力搅拌： 放置精度（3D）： 高度： 宽度： 深度： 重量： 72 5 ml/25 ml 2 µl PEEK 是 是 80°C 速度可调 1 mm 48.2 cm 56.9 cm 62.2 cm 24 kg 摘要 7450自动进样器是针对EPA方法524, 624和8260水样品和土壤样品的具有顶空采样功能的72位自动进样器，并采用我们的第二代自动进样器，具有更精确的样品加载处理能力。完美匹配7000 吹扫捕集浓缩器。 Product Introduction 产品特点 72位自动进样器 自动进样器有三个单独的样品架，可容纳多达72个40 mL VOC小瓶。 内标添加 自动进样器配有一个5毫升的储液管，用于内标添加。 5 mL和10 mL样品定量环 根据吹扫捕集浓缩器的样品体积，自动进样器可以兼具5 mL（默认）和25 mL（可选）样品转移能力。 动态顶空 7450配备了土壤模块，用于动态顶空采样，符合EPA 8260土壤样品要求。 水样品工作站 土壤模块配有水样品工作站用于处理水样品，使用独立针头用于土壤样品，防止交叉污染。 电磁搅拌器 根据EPA 5030和5035对土壤样品的采样要求，磁力搅拌器驱动土壤小瓶中的磁力搅拌棒。 PEEK样品管路 化学惰性的样品通道保证您的吹扫捕集测试成功，即使处理的是侵蚀性液体样品。 强大且用户友好的PC接口 PC软件具有友好的界面，每次运行可以使用可编程的管路冲洗，可编程的空白样品，内标添加，以及向土壤样品中加水。 带光学传感器的夹具 高度可靠的VOC小瓶夹具具有光学传感器确保安全，可以放心将样品转移到土壤模块。 精密机器臂 由于具有高精度驱动机构，第二代自动进样器的位置精度提高了50%达到1 mm（X，Y和Z）的3D放置精度。 易于定位校正 在第二代自动进样器中，工位校准已得到显著改善。用户友好的软件工具有助于在10分钟内完成校准。 寿命更长 第二代自动进样器配有SMART加速控制，可将驱动机构的影响降低40%。较少的耗损延长了系统的寿命。 Product Features 应用 EPA 502/524.2 VOCs using the CDS 7400 Autosampler Click to Download Assay of Hydrocarbons in Soil using the 7400 Autosampler Click to Download Reproducibility of the 7400 Autosampler for BTEX in Water Click to Download Automated Analysis of BTEX in Soil Click to Download Quantitation of C2 to C4 Carbonyls by Purge & Trap Click to Download Purge and Trap - The Gases Click to Download 1 2 Applications 零配件 仪器产品 描述 SKU 7450 Autosampler Complete - soil and waters 7450-5001 Please reload 选配件 描述 SKU Automatic Switching Loop 5 ml and 25 ml 7071-5120 Please reload 零部件 描述 SKU Fritted Vessel – 5 ml sidearm – required for 7450 1010-0493 Fritted Vessel – 25 ml sidearm – required for 7450, 25 ml samples 1010-0509 Vial – Clear Vial/Septa 40 ml (72) 1010-0497 Vial – Amber Vial/Septa 40 ml (72) 1010-0498 Water Inner Needle 1010-0505 Water Outer Needle 1010-0506 Soil Inner Needle 7071-4041 Soil Outer Needle 7071-5102 Please reload Parts & Options 下载 产品宣传册 CDS Purge and Trap Brochure 手册与软件申请表格 Thanks for contacting CDS! Our specialist will contact you soon. 发送 Downloads 吹扫捕集系列产品 CDS 7000E 值得信赖的CDS吹扫捕集浓缩器 阅读更多内容 CDS 7350 CDS第二代吹扫捕集自动进样器（仅用于水样品模式），精度显著提高。 阅读更多内容 CDS 7000C 全球首台可与CTC PAL联用的吹扫捕集仪 阅读更多内容 CDS 7450 CDS第二代吹扫捕集仪自动进样器，可用于水样品和土壤样品双模式。 阅读更多内容 CDS 8000 CDS最具灵活性的三合一吹扫捕集仪和热解吸仪。 即将推出 更多新产品即将推出

CDS's 3nd generation Purge and Trap autosampler with dynamic headspace module for GC-MS. Home >> Products >> Purge & Trap >> CDS 8500A Purge & Trap Introduction Features Applications Parts & Options Downloads CDS 8500A Product Introduction Product Introduction Specifications: Sample Positions: Sampling Volume: Internal Standard: Sample Pathway: Water Mode: Soil Mode: Soil Heating Temperature: Magnetic Stirrer: Placement Accuracy (3D): Height: Width: Depth: Weight : Options: 110 0.1 ml - 25 ml 4 channel, 1/2/5/10/20/25μL PEEK Yes Yes 150 °C Speed adjustable 1 mm 21 inch 36 inch 24 inch 80 lbs Water Only Autosampler Summary The 8500A autosampler is a 110 position autosampler with dynamic headspace sampling function for EPA methods 524, 624 and 8260 (both water and soil), and built on our 3rd generation autosampler with a faster and smarter sample loading. A perfect match for the 8500C Purge & Trap concentrator with integrated software control. Product Features 110 Position Autosampler The autosampler comes with a high capacity of 110 positions for 40 ml VOC vials in one sample rack. Sample code is supported in the software. Internal Standard Addition CDS 8500A autosampler adopts a unique EPC controlled manifold to precisely inject a user-select volume (1/2/5/10/20/25μL) of internal standard into the sample from 4 channels. High Precision Syringe The 8500A autosampler uses a 25 mL high precision syringe to drive the sample flow, and delivers a variable sample volume from 0.1 mL to 25 ml with a use-select sample dilution ratios from 1:1/1:2/1:5/1:10/1:20/1:50/1:100, which supports the automated sample calibration. Dynamic Headspace The 8500A is equipped with a soil cup for dynamic headspace sampling in compliance with EPA 8260 soil samples. The max temperature is 150°C for routine Dynamic Headspace applications. Water Station The water sample and soil sample are using its dedicated sampling station and needle without worry of cross-contamination. Magnetic Stirrer The magnetic stirrer drives the magnetic bar in the soil vial based on EPA 5030 and 5035 sampling requirement for soil samples. PEEK Sample Pathway The chemically inert sample pathway guarantees the success of your purge and trap testing even with challenging liquid samples. Powerful PC Interface The PC software has a friendly interface to configure each run with programmable rinses, programmable blanks, internal standard addition, and water addition to soil sample. Soft Draw Gripper The highly versatile vial gripper has a 4 soft draws to offer the maximum compatibility and reliability to transport glass vials from various manufacturers. Precision Robotic Arm The position accuracy of the 3rd generation autosampler is 1 mm (X, Y and Z) 3D placement accuracy due to a high precision drive mechanism. The 8500A is pre-calibrated in the factory for easy installation. Methanol Extraction The 8500C autosampler has the capability to support methanol extraction to high concentration samples as well as offering methanol rinse to the liquid sample pathway. Build-in EPA Method The 8500 software controls both the 8500A autosampler and the 8500C concentrator. EPA method has been built in to jump start your sample runs. Product Features Applications EPA 502/524.2 VOCs using the CDS 7400 Autosampler Click to Download Assay of Hydrocarbons in Soil using the 7400 Autosampler Click to Download Reproducibility of the 7400 Autosampler for BTEX in Water Click to Download Automated Analysis of BTEX in Soil Click to Download Quantitation of C2 to C4 Carbonyls by Purge & Trap Click to Download Purge and Trap - The Gases Click to Download 1 2 Applications Parts&Options Description Part Number Instrument 8500A Autosampler Water Only - 110 sample position 85A1-3003 (115V)/85A1-3004 (220V) Instrument 8500A Autosampler Soil and Water - 110 sample position 85A1-3001 (115V)/85A1-3002 (220V) Option 110-position Chiller Tray for 8500A Autosampler 85A1-3005 Parts Vial - Clear Vial/Septa 40ml (72 each) 1010-0497 Parts Vial - Amber Vial/Septa 40ml (72 each) 1010-0498 Parts Vial Septa 22mm for 40ml Vials (72 each) 1010-0499 Parts & Options Downloads Downloads Marketing Brochures CDS Purge and Trap Brochure Request form for manuals and software Purge & Trap Series CDS 8500C Purge and Trap concentrator for 8500A autosampler Read More CDS 8500A CDS's 3nd generation Purge and Trap autosampler Read More CDS 7000C World's first Purge and Trap tool for CTC PAL autosamplers. Read More

CDS's most cost effective single temperature Pyroprobe for Pyrolysis - Gas Chromatography - Mass Spectrometry (Py-GC-MS) Home >> Products >> Pyrolysis >> CDS 4000 Pyrolysis Introduction Features Applications Parts & Options Downloads CDS 4000 Product Introduction Product Introduction Specifications: Programmable Time: Trap: Temperature Range: Temperature Accuracy: Heating Rate: Probe Clean: Probe Dry: Multi-Temperature Steps: Interface Type: Interface Temperature: Interface Heating Rate: GC Connection: Weight: Dimension (W x H x D): Weight: Options: 0 - 999.9 minutes No Up to 1300°C 1°C 0.01°C/ms to 20°C/ms 0.01°C/sec to 999.9°C/sec 0.01°C/min to 999.9°C/min Yes Yes No Low Thermal Mass Up to 350°C 1°C/min to 100°C/min Injection Port Direct Mount 25 cm x 44cm x 46 cm 9 kg None Summary The CDS Model 4000 Pyroprobe is specifically designed for users that occasionally need pyrolysis to assist their work in Pyrolysis - Gas Chromatography - Mass Spectrometry (Py-GC-MS). The 4000 has an economical price tag, and possesses a direct GC injection port mount feature to simplify the operation and installation. Installation and removal only takes minutes on conventional GC. Product Features CDS Resistively Heated Filament The CDS resistive heating coil is the most versatile way to pyrolyze your sample with the lowest thermal mass and quickest temperature ramp up rate. Super Compact Design with Small Foot Print The CDS 4000 Pyroprobe is one of the smallest pyrolyzers in the world. Its compact design provides several benefits as easy setup and minimal use of bench space. Compatible to All Major GC through Remote Start Cable The CDS 4000 Pyproprobe is capable to handle GC start signals from all major GC models including TTL and contact closure. Direct GC Injection Port Mount The CDS 4000 Pyroprobe interface is installed directly on the GC injection port and could be removed in minutes. Sample Rack for Easy Sample Storage The CDS 4000 Pyroprobe comes with a built-in sample rack which provides easy storage of your loaded samples. USB Connectivity The CDS 4000 Pyroprobe comes with a USB port to plug and play to the control software installed on your PC. Product Features Applications 293 Characterizing Tar Products from Corn Stover in Gasification using the CDS 5200HPR This application note investigates PAH formation in untreated and demineralized corn stover using pyrolysis in air under elevated... 292 Screening Total Organic Fluorine in Solid Samples Using a Pyroprobe This application note highlights the use of the Pyroprobe 6150 for the analysis of Total Organic Fluorine (TOF), PFAS as a screening... 291 Rapid Characterization of a Solid Pipeline Residue from CO2 Capture Processes Using a Pyroprobe This application note highlights the use of the Pyroprobe 6150 for the analysis of a solid residue collected from CO2 capture systems,... 289 Characterizing a Lithium-Ion Battery Recycling Stream using Evolved Gas Analysis and Multi-Step Pyrolysis This application note investigates the lithium-ion battery recycling stream using Evolved Gas Analysis coupled with Multi-Step Pyrolysis... 288 Characterizing Textiles using Evolved Gas Analysis and an MSChrom Database This application note demonstrates characterization of woven jean fabric using Evolved Gas Analysis coupled with Multi-Step Pyrolysis... 282 Pyrolysis of HDPE Using Hydrogen as a GC Carrier Gas This application note demonstrates the benefits of using hydrogen as a carrier gas on a Thermo GC-MS and a CDS Pyroprobe. 6000 6200 6150 1 2 3 4 5 Applications Part&Options Description Part Number Instrument Pyroprobe 4000 Single Temperature Setpoint Pyrolyzer 40P4-5020(115V)/40P4-5021(220V) Option CDS Analytical Additive / Biofuel Library 10A1-3021 Option Pyrolysis Sample Prep Station 5003-5088 Option CDS Analytical Polymer Pyrolysis GC/MS Library 10A1-3018 Parts Quartz Wool 1001-0345 Parts Fire Polished Quartz Tubes 0.95" L for 1/4" Manual Probes (20/pk) 10A1-3007 Parts Economy Quartz Tubes 0.95" L for 1/4" Manual Probes (100/pk) 10A1-3008 Parts & Options Downloads Marketing Brochures CDS 4000 Brochure Request form for manuals and software Thanks for contacting CDS! Our specialist will contact you soon. Send Downloads Pyroprobe Series CDS 4000 CDS's most cost effective single temperature Pyroprobe. Read More CDS 6200 CDS's 6th Generation Pyroprobe with trapping capabilities for reactant gas apps. Read More CDS 6150 CDS's 6th Generation Pyroprobe with up to 10 programmed temperature steps. Read More DISC Module CDS's DISC module provides the easiest way to load your pyroloysis sample. Read More Autosampler Module CDS's autosampler module with Dynamic Loading to improve productivity for any 6000 series pyroprobe. Read More CDS HPR CDS's HPR Pyroprobe allows pyrolysis at elevated pressure with built-in reactor. Read More Photoprobe Photoprobe is a device that irradiates sample in the Drop In Sample Chamber with high intensity UV light Read More Cryo-mill CDS's cryo-mill is a laboratory ball mill that grinds polymer sample in liquid nitrogen temperature. Read More MSChrom Py-GC-MS Database Powerful Py-GC-MS data processing software and database Read More

CDS's most cost effective single temperature Pyroprobe. 关于公司 产品线 产品市场及应用 技术支持 立即订阅 Home >> Products >> Pyrolysis >> CDS 4000 热裂解 产品介绍 产品特点 应用 零配件 下载 CDS 4000 产品介绍 产品规格： 可编程时间： 聚焦阱： 温度范围： 温度精度： 加热速率： 探头清洁： 探针干燥： 多温度步骤： 接口类型： 接口温度： 接口加热速率： GC连接： 重量： 尺寸（宽x高x深）： 选配： 0 - 999.9分钟 没有 高达1300°C 1℃ 0.01°C / ms至20°C / ms 0.01℃/s至999.9℃/s 0.01℃/min至999.9℃/min 是 是 没有 低热容 最高可达350°C 1℃/ min至100℃/ min 进样口直接安装 25厘米x 44厘米x 46厘米 无 概要 CDS 4000型Pyroprobe专门为偶尔需要热裂解来帮助他们工作的用户设计。 4000具有经济的价格，并具有GC进样口直接安装功能，显著简化操作和安装。 常规GC上的安装和拆卸也只需要几分钟。 Product Introduction 产品特点 CDS电阻加热线圈 CDS电阻加热线圈是以最低的热容和最快的升温速率来热解样品的最通用的方法。 超小型设计占用实验台面很小 CDS 4000 Pyroprobe是世界上最小的热裂解器之一。其紧凑的设计提供了多重便利，易于设置并且只使用很小的工作台空间。 通过远程启动电缆与所有主要GC兼容 CDS 4000型Pyroprobe能够处理所有主要GC型号的启动信号，包括TTL和触点闭合。 GC进样口直接安装 CDS 4000 Pyroprobe接口直接安装在GC进样口上，可以在几分钟内完成拆卸。 样品架可轻松存放样品 CDS 4000 Pyroprobe内置样品架，可轻松存储装载的样品。 兼容CDS热解吸探头 使用可选的热解吸探头，可以将CDS 4000转变成一台测定空气中VOC的热解吸器。 USB连接 CDS 4000 Pyroprobe带有一个USB端口，用于即插即用的PC上安装的控制软件。 强大的PC接口 强大的基于Windows的软件可以完全控制热裂解区和接口。 快速连接电缆 通过快速连接电缆可以方便地设置接口和主仪器之间的连接。 Product Features 应用 293 Characterizing Tar Products from Corn Stover in Gasification using the CDS 5200HPR This application note investigates PAH formation in untreated and demineralized corn stover using pyrolysis in air under elevated... 292 Screening Total Organic Fluorine in Solid Samples Using a Pyroprobe This application note highlights the use of the Pyroprobe 6150 for the analysis of Total Organic Fluorine (TOF), PFAS as a screening... 291 Rapid Characterization of a Solid Pipeline Residue from CO2 Capture Processes Using a Pyroprobe This application note highlights the use of the Pyroprobe 6150 for the analysis of a solid residue collected from CO2 capture systems,... 289 Characterizing a Lithium-Ion Battery Recycling Stream using Evolved Gas Analysis and Multi-Step Pyrolysis This application note investigates the lithium-ion battery recycling stream using Evolved Gas Analysis coupled with Multi-Step Pyrolysis... 288 Characterizing Textiles using Evolved Gas Analysis and an MSChrom Database This application note demonstrates characterization of woven jean fabric using Evolved Gas Analysis coupled with Multi-Step Pyrolysis... 282 Pyrolysis of HDPE Using Hydrogen as a GC Carrier Gas This application note demonstrates the benefits of using hydrogen as a carrier gas on a Thermo GC-MS and a CDS Pyroprobe. 6000 6200 6150 1 2 3 4 5 Applications 零配件 仪器产品 描述 SKU Pyroprobe® 4000 pyrolyzer - 220 Volt 40P4-5021 Pyroprobe® 4000 pyrolyzer - 115 Volt 40P4-5020 Please reload 选配件 描述 SKU Polymer pyrolysis GC/MS Library 10A1-3018 Additive Library 10A1-3021 Sample Prep Station 5003-5088 Please reload 零部件 描述 SKU Needle, 22 ga. Side port 1010-0475 Vespel Ferrules (10/pack) 10A1-3019 Economy Quartz tubes (100/pack) 10A1-3008 Fire polished quartz tubes (20/pack) 10A1-3007 Quartz Wool 1001-0345 Please reload Parts & Options 下载 产品宣传册 CDS 4000 Brochure 手册与软件申请表格 Thanks for contacting CDS! Our specialist will contact you soon. 发送 Downloads 热裂解仪系列产品 CDS 4000 CDS最经济的单一温度Pyroprobe 阅读更多内容 CDS 6200 CDS第6代Pyroprobe，具有用于反应气氛下裂解的吸附阱功能。 阅读更多内容 自动进样器模块 CDS的自动进样器模块可以动态加载样品，将6000系列的样品通量大大提高。 阅读更多内容 CDS 6150 CDS第6代Pyroprobe，具有10个可编程升温步骤。 阅读更多内容 DISC模块 CDS的DISC模块为加载热裂解样品提供了最简单的方法。 阅读更多内容 CDS HPR CDS的HPR Pyroprobe可以在高压下的内置反应器中完成热裂解。 阅读更多内容

CDS's reliable Purge and Trap concentrator as a working hours for decades.  关于公司 产品线 产品市场及应用 技术支持 立即订阅 Home >> Products >> Purge & Trap >> CDS 7000E 吹扫捕集 产品介绍 产品特点 应用 零配件 下载 CDS 7000E 产品介绍 产品规格： 可编程时间： 吸附阱： 传输线： 解吸预加热选项： 阀箱温度： 传输线温度： 湿气阱温度： 解吸阱温度： 吸附剂： 重量： 尺寸（宽x高x深）： 选配： 0 - 999.9分钟 0.3厘米外径×28.5厘米长 1.5米不锈钢包层熔融石英，柔性加热夹套。 是。 350℃ 375℃ 425℃ 425℃ Vocarb或Tenax 8.6公斤 25厘米x 44厘米x 46厘米 热水冲洗模块；电子质量流量控制器 摘要 作为最具成本效益的吹扫捕集浓缩器，CDS-7000E已经数十年被认可为业界主力产品。 7000 E具有我们专利的泡沫传感器，一种新的重新设计的湿气控制器，以及我们自主研发的可更换样品气动系统，均具有最高的适用性和无与伦比的色谱分辨率。 Product Introduction 产品特点 阀箱温度高达350°C 行业最高温度可编程阀箱将EPA 8260中定义的VOC扩展到sVOC Silconert 2000涂层样品通道 7000E使用最好的化学内层涂层，可以放心处理高浓度的极性样品 可选土壤模式传输线 7000E配有标准样品传输线，可与任何GC系统连接。可选的土壤模式传输管线可将7000E扩展为顶空浓缩器。 Hydroguard湿气阱 新设计的湿气捕集阱涂有Hydroguard，优化了水分控制，寿命显著延长。 快速维修面板 快速维修面板提供了一种方便的方式来维护样品路径，以尽量减少任何停机时间。 专利泡沫传感器 这是又一种行业第一的专有装置，消除了样品发泡和随后污染样品路径的可能性。 与5 ml和25 ml 吹扫管兼容 根据您分析的灵敏度要求，7000E能够处理5ml和25ml的样品体积 强大且用户友好的PC接口 强大的基于Windows的软件可以完全访问吹扫捕集参数设置。 可选电子可编程流量控制 在烘烤模式下提高流速，以提高GC分辨率，同时在吹扫模式下保持不同的流速。 Product Features 应用 Check back soon Once posts are published, you’ll see them here. Applications 零配件 仪器产品 描述 SKU Model 7000E-SS Purge & Trap Concentrator - 220 Volt 70E4-5016 Model 7000E-SS Purge & Trap Concentrator - 115 Volt 70E4-5036 Please reload 选配件 描述 SKU Sparger Heater Assembly-220 Volt 8084-5014 Sparger Heater Assembly-115 Volt 8084-5012 Please reload 零部件 描述 SKU 5 ml Sparger Vessel, fritted 30B3-3006 25 ml Sparger Vessel, fritted 30B3-3004 25 ml Drain Tube 70E1-3003 Trap insert - VOCARB 3000 7072-5041 Wet Trap Insert Assembly 70E1-3004S 5 ml impinger vessel 30B3-3017 25 ml impinger vessel 30B3-3018 Please reload Parts & Options 下载 产品宣传册 CDS Purge and Trap Brochure 手册与软件申请表格 Thanks for contacting CDS! Our specialist will contact you soon. 发送 Downloads 吹扫捕集系列产品 CDS 7000E 值得信赖的CDS吹扫捕集浓缩器 阅读更多内容 CDS 7350 CDS第二代吹扫捕集自动进样器（仅用于水样品模式），精度显著提高。 阅读更多内容 CDS 7000C 全球首台可与CTC PAL联用的吹扫捕集仪 阅读更多内容 CDS 7450 CDS第二代吹扫捕集仪自动进样器，可用于水样品和土壤样品双模式。 阅读更多内容 CDS 8000 CDS最具灵活性的三合一吹扫捕集仪和热解吸仪。 即将推出 更多新产品即将推出

CDS Analytical is a leading global provider of innovative GC thermal sample preparation instrumentation for GC/MS in the analytical lab. Home >> Company >> International Distributors Distributors International Africa Egypt Company: Contact: Email: Phone #: Fax #: Mobile #: Smart Group Co. Amr Gouda Ahmed amr-gouda@smartgroup-eg.com info@smartgroup-eg.com (+20) 233-355-939 (+20) 237-614-744 (+20) 101-715-9992 South Africa Company: Contact: Email: Phone #: Website: Chromspec Kevin Reeves kevin@chromspec.co.za info@chromspec.co.za (+27)118-752-037 www.chromspec.co.za Australia & Oceania Australia & New Zealand Company: Contact: Email: Phone #: Website: DKSH Tony Lattari tec-marketing-au@dksh.com +61 1 800 010 114 http://direct.dksh.com.au/lab Asia China & Hong Kong Company: Contact: Email: Phone #: Website: LabTech Corporation, Inc. Lishang Zheng lzheng@cdsanalytical.com (+86) 010-80486450 www.labtechgroup.com Malaysia Company: Contact: Email: Phone #: Fax #: Website: IT TECH RESEARCH SDN BHD HO KOON YEEN sales@ittech.com.my 03-5192 7742 03-5192 7743 www.ittech.com.my Singapore Company: Contact: Email: Phone #: Fax #: Website: IT TECHNOLOGIES PTE LTD DANAPALAN ARUMUGA sales@ittech.com.sq 65-68970626 65-68970627 www.ittech.com.sg Thailand Company: Contact: Email: Phone #: Saengvith 2000 Company Ltd. Varaporn Chunsang saengvith@csloxinfo.com (+66) 2-861-9446-9 Vietnam Company: Contact: Email: Phone #: Website: 2H INSTRUMENT Co., Ltd Dr Hoang Tho Ha thoha.hoang@2hins.com.vn +84 24 37911179 www.2hinst.com Vietnam Company: Contact: Email: Phone #: INDOCHINA company Phuong Linh Le sales@indochinaco.com.vn Vietnam Company: Contact: Email: Phone #: Fax #: Website: VIET NGUYEN TECHNOLOGY TRADING SERVICE Co.,ltd Mr. TRAN THE DUY duy.tran@vietnguyenco.vn +84 2866 570570 +84 2862 557 416 www.vietnguyenco.vn India Company: Contact: Email: Phone #: Asmi analytical Ajit Soundankar asmianalytical@gmail.com 7798997733// 7738087733 Indonesia Company: Contact: Email: Phone #: PT. Saranalab Mandiri Analitika Abdurahman abdurahman@saranalaboratorium.com info@saranalaboratorium.com (+62) 21 82736962 Korea Company: Contact: Email: Phone #: UMC Science Co., Ltd. Yeong Seok Choi umc@umckorea.com (+82)216-611-906 Taiwan Company: Contact: Email: Phone #: Fax#: Website: Scientific Hightek Co., Ltd. Raymond Yu, Eric Hung yu@gclc.com.tw , support@gclc.com.tw (02) 2652-2200 (02) 2653-0022 www.GCLC.com.tw Europe Austria, Germany Company: Contact: Email: Phone #: Website: S-Prep GmbH Peter Kainrath kainrath@s-prep.com (+49) 755-193-2696 www.s-prep.com Belgium, Luxemburg, Netherlands Company: Contact: Email: Phone #: Website: JSB Benelux Sander Affourtit info@go-jsb.com +31(0)320 87 00 18 www.go-jsb.com Czech Republic Company: Contact: Email: Phone #: Website: AMEDIS, spol. s r.o. Frantisek Lastovicka sales@amedis.cz +420 281918191 www.amedis.cz France and Switzerland Company: Contact: Email: Phone #: Quad Service Benoit Auguin benoit.auguin@quadservice.com 33-1-39-11-8220 Greece Company: Contact: Email: Phone #: Analytical Instruments S.A. Katerina Aravantinou karavantinou@analytical.gr 30-210-6748973 Hungary Company: Contact: Email: Phone #: UNICAM Hungary Ltd Orsolya Kóréh unicam@unicam.hu 36-1-221-5536 Poland Company: Contact: Email: Phone #: Labsolution Sp. zo.o. Seweryn Felis seweryn.felis@labsolution.pl (+48) 222-050-110 Poland Company: Contact: Email: Phone #: Website: LABOSERVICE Mr. Michal Adamski michal.adamski@laboservice.com.pl +48-618305502 www.laboservice.com.pl Poland Company: Contact: Email: Phone #: Fax #: Website: Perlan Technologies Polska Sp. z o.o klient@perlan.com.pl (+48) 22 549 14 00 (+48) 22 549 14 01 www.perlan.com.pl Slovak Republic Company: Contact: Email: Phone #: Website: AMEDIS, spol. s r.o. Lubos Mazag amedis.ba@amedis.sk +421 2 4341 4349 www.amedis.sk Spain Company: Contact: Email: Phone #: Ingenieria Analitica, S.L. Marc Gibert mgibert@ingenieria-analitica.com 34 93 590-2850 Sweden Company: Contact: Email: Phone #: KOVALENT AB Mikael Alfredsson mikael.alfredsson@kovalent.se +46 31 709 81 80 United Kingdom, Ireland Company: Contact: Email: Phone #: Website: Analytix Limited Simon J. Osborne simon@analytix.co.uk sales@analytix.co.uk (+44) 191-519-4504 www.analytix.co.uk Middle East Israel Company: Contact: Website: Phone #: Bargal Analytical Instruments Elad Gillon www.bargal.co.il (+972) 039-796-533 Turkey Company: Contact: Email: Phone #: Fax#: Website: Terralab Laboratuvar Malz. San. ve Tic. A.S. Ufuk Ozgen ufuk.ozgen@terralab.com.tr 90 312 472 7396 90 312 472 73 98 www.terralab.com.tr North America Canada Company: Contact: Email: Phone #: Contact: Email: Phone #: Chromatographic Specialties Todd Crossman toddc@chromspec.com 1 613-342-4678 ext. 320 Yves Bouchard yvesb@chromspec.com 1 613-342-4678 ext. 326 Latin & South America Argentina Company: Contact: Email: Phone #: Bio Esanco S.A. Norberto Ponzo nponzo@bioesanco.com.ar (+54) 11 5237-1111 Brazil Company: Contact: Email: Phone #: Radchrom Analítica LTDA Customer Service contato@radchrom.com.br (+19) 3833-1300 Colombia Company: Contact: Email: Contact: Email: Phone #: Khymos S.A. Adriana Gonzalez adriana.gonzalez@khymos.com Mariluz Barrios Arrazola mariluz.barrios@khymos.com 57-1-691-3111 Mexico Company: Contact: Email: Phone #: Comercializadora Imemisa S.A. de C.V. Carlos Cabrera ccabrera@ciayuda.com imemisa@yahoo.com.mx (+52)(55) 55199520 (+52)(55) 55194092 Russia and CIS countries Slovenia Company: Contact: Email: Phone #: Fax #: Website: Omega d.o.o. Anton Kovač omega@omega.si +386 1 4273213 +386 1 4273191 www.omega.si United Arab Emirates , Kingdom of Saudi Arabia, Qatar, Oman, and Malaysia Portugal Company: Contact: Email: Phone #: Fax #: Website: Paralab SA Maria Reis maria.reis@paralab.pt +351 224 664 320 +351 224 664 321 www.paralab.pt Company: Contact: Email: Phone #: Fax #: Website: Gulf Bio Analytical LLC Gaurav Sananse gaurav_s@gulfbioanalytical.com +971501312336 www.gulfbioanalytical.com Estonia Company: Contact: Email: Phone #: Website: Quantum Eesti AS Allan Künnapas quantum@quantum.ee +372 7301321 www.quantum.ee For all the other countries, please contact Email: info@cdsanalytical.com For LabTech product inquiries outside of the United States, Mexico, and Canada, contact marketing@labtechsrl.com to find your local representative. Company: Contact: Email: Phone #: Fax #: Website: Energolab Service Department Sergei Kukushkin s.kukushkin@energolab.com post@energolab.com +7 495 926 02 15 add. 147 +7 495 926 02 15 www.energolab.com Distributors are licensed representatives of CDS Analytical Pyroprobes, Purge and Trap, and Thermal Desorption products only.

2nd Generation rotary evaporator with motor lifting Home >> Products >> Vacuum Pump >> VP18 Plus Vacuum Pumps Introduction Features Applications Parts & Options Downloads VP18 Plus Product Introduction Product Introduction Specifications: Pumping Rate Vacuum Pressure Power Noise Level Dimensions (L×W×H) cm Weight (kg) Power Supply 18 L/min 20 mbar 30W <42 dB 30×17x24 6 115V, 60Hz Summary The LabTech VP18 Plus oil free vacuum pump utilizes a mechanical diaphragm, eliminating the difficulty of handling pump oil, while supporting a wide variety of applications from gas analytical equipment to rotary evaporation. The compact design saves on lab space and reduced noise levels help to create a more comfortable environment for lab workers. Product Features Oil Free The mechanical diaphragm eliminates the difficulty of dealing with pump oil. Anti-corrosion Components Chemical resistant pump parts ensure a long service lifetime. Optional Vacuum Control Module VC1000 pressure control add-on for precise control from 0-999 ( ± 1) mbar. Wide Application Range Use for a variety of applications, including in combination with LabTech rotary evaporators. Compact Design Minimal footprint to save on important lab space and is easily moved from location to location. Quiet Operation With quiet operation of <42 dB, lab noise is reduced and is more comfortable for lab workers. Product Features Pumping Rate Vacuum Pressure Power Noise Level Dimensions (L×W×H) cm Weight Power Supply 18 L/min 20 mbar 30W <42 dB 30×17x24 6 kg 115V, 60Hz VP18 Plus Rocker 410 23 L/min 25 mbar 00W 52 dB 31×14x20 5.2 kg 115V, 60Hz Applications Rotary Evaporation Vacuum Filtration Degassing Drying Chambers Distillation Applications Parts & Options Instruments Description SKU Category Part Number Description Parts DFL-XJG002 Rubber tube for vacuum pump Parts DFL-ZKB002 Pressure gauge for vacuum pump Parts VP18KIT Seal set for VP18PLUS Option LV6010 VC1000 Vacuum Controller Parts & Options Downloads Downloads Marketing Brochures Vacuum Pump Brochure Request form for manuals Thanks for contacting CDS! Our specialist will contact you soon. Send Family Series VP18 Plus Oil free vacuum pumps offering vacuum pressures as low as 20mbar. Read More VP30 The most cost effective oil-free vacuum pump solution for applications without low pressures needs. Read More VP50 Plus Oil-free pump with high pumping rates perfect for large volumes in applications without low pressures needs. Read More

Near-real time sampling Thermal Desorption system. ​ Home >> Products >> Thermal Desorption >> CDS 9305 Thermal Desorption Introduction Features Applications Parts & Options Downloads CDS 9305 Product Features Product Introduction Product Features Versatile Configurations to Mainstream TD Tubes The CDS 9300 families could be configured to adopt 6mm x 4.5" CDS TD tube, 10mm x 4.5" CDS TD tube, 1/4" x 3.5" PE and Markes TD tube and VOST 16mm x 5" TD tube Cryogen Free with Pre-Desorb and Pre-Heat To improve the resolution of early eluting molecules, CDS uses pre-desorb and pre-heat technique to mechanically confine analytes in the focus tube until the desorption temperature is reached. Hand-Held Plug-in Control Interface This hand-held interface gives you easy access to the Thermal Desorption system without using a PC. This is an essential feature for mobile labs in field sampling and analysis. High Temperature Valve Oven at max 350 °C The high temperature oven (350 °C) significantly extends the analyte range from VOCs to sVOCs. Built Tough with Easy Maintenance The CDS 9300 is built tough on military standard. Routine maintenance only requires basic tools in accessing the components. Powerful Windows Based Software The software is Windows 10 compatible to give user full access to method editor and sequence table. Built-in MFC With the built-in Mass Flow Controller, you could accurately control the sampling volume through the method editor Quick Connect to Vacuum The 9305 has quick connect lock to vacuum line. The on and off the pump could be controlled through the 9305 power panel. Compatible to Summa Canister Besides the thermal desorption tube, the CDS 9305 supports various air sample container, including Tedlar bags and Summa Canister Product Introduction Specifications: Programmable Time's: Focus Trap: Dynamic Range: Cyrogen: Temperature Accuracy: Tube Heating Rate: Trap Heating Rate: Valve Oven: Transfer Line: Sample Desorb: Focus Desorb: On-Line Sampling: GC Connection: Weight: Dimension (W x H x D): 0 - 999.9 minutes Yes, Standard 1/8" Vocarb Optional 6 mm Tenax-TA C2-C33+ Not Required. Standard Pre-Desorb 1°C 1000°C/min 900°C/min Up to 350°C Up to 350°C Up to 400 °C Up to 400 °C Near-real Time, Single Tube Heated Transfer Line 19 kg 13" X 11" X 18" Summary The CDS 9305 Thermal Desorption system adds a Mass Flow Controller (MFC) for near-real time sampling. It features a hand-held controller for system maintenance and direct communication. With the highest programmable valve temperature on the market (350 °C), the 9305 can venture into applications where other systems can not perform, including VOCs, sVOCs, polar and nonpolar compounds. The two stage trapping and desorption process with Pre-desorb and Pre-heat feature eliminate the need of any Peltier cooling or liquid cryogen to improve the resolution for early eluting molecules. An optional heated sampling line is available to collect air samples. Applications Calibration Curves for PFPH Formaldehyde Hydrazone Using Thermal Desorption Click to Download Formaldehyde Quantitation In Cigarette Smoke By Thermal Desorption Click to Download Qualitative Rum Profiles using Thermal Desorption with the Monotrap® Click to Download 132a Fragrance Analysis of a Hair Conditioner Click to Download Pesticide Analysis of Fruits and Vegetables Click to Download Formaldehyde Detection using PFPH and Thermal Desorption Click to Download 1 2 3 4 5 Applications Parts&Options Description Part Number Instrument ACEM Thermal Desorption System, Model 9305 NRT with 6mm Trap 9304-5029(115V)/9304-5030(220V) Option 1/4" OD X 3.5" L Thermal Desorption Tube Heater Chamber for 9300 9304-5091 Option VOST (16 mm X 4.5") Heater Chamber Module for 9300 9304-5090 Option Vacuum Pump, low noise and vibration, max. vacuum - 27" high FA07-5632(115V)/FA07-5633(220V) Option 5 feet Heated Sampling Line for 9305/9350 8084-5052(115V)/8084-5053(220V) Parts 6 mm O.D. x 4 1/2" Long TD tube 60:80 Tenax-TA/Carboxen 1000/Carbosieve SIII MX06-2191 Parts Sorbent Tube, empty- 4 1/2" long, 6 mm O.D. x 4 mm I.D. - with glass frit MX06-2101 Parts Focus Trap, 4 1/2"x0.9mm 60:80 mesh Tenax-TA/Carboxen1000/CarbosieveSIII MX06-2232 Parts Sorbent Tube, 6 mm O.D. x 4 1/2" long, packed with 150 mg 60:80 mesh Tenax-TA MX06-2111 Parts Sorbent Tube, 6 mm O.D. x 4 1/2" long, packed with 150 mg 20:35 mesh Tenax-TA MX06-21112035 Parts Sorbent Tube, empty - 4 1/2" long, 6 mm O.D. x 4 mm I.D. - straight tubing MX06-2100 Parts 6 mm O.D. x 4 1/2" TD tube, 20:35 mesh Tenax-TA/Carboxen 1000/Carbosieve SIII MX06-2131 Parts Sorbent Tube, 6 mm O.D. x 4 1/2" long, packed with 150 mg 60:80 mesh Tenax-TA MX06-2111 Parts Focus Trap, 4 1/2" Long x 0.9 mm I.D., packed with 60:80 mesh Carbosieve SIII MX06-2290 Parts & Options Downloads Marketing Brochures CDS Thermal Desorption Brochure Request form for manuals and software Thanks for contacting CDS! Our specialist will contact you soon. Send Downloads Thermal Desorption Series CDS 9300 CDS's base model instrument for single tube desorption. Read More CDS 9350 CDS 9350 supports continuous real time air monitoring through a dual tube setup. Read More CDS 7550S Stand-alone 72 position Thermal Desorption system Read More Sampling Devices Portable single channel air sampler Read More CDS 9305 Near-real time sampling Thermal Desorption system. Read More CDS 7550 72 position autosampler for 9300 family improve productivity and efficiency. Read More Tube Conditioner CDS's single and six tube conditioners are essential accessories for your analysis. Read More CDS 7550S Pro Stand-alone 72 position Thermal Desorption system with automated sample saver Read More

3M Empore Solid Phase Extraction Cartridge Home >> Products >> Empore >> Empore Cartridge Introduction Features Applications Parts & Options Downloads Empore Cartridge Product Introduction Product Introduction Specifications: Application: Brand: Filter Type: Formulation: Industries: Units per Case: Solid Phase Extraction Empore™ Extraction Cartridge C18 Sorbent Particles, C8 Sorbent Particles, SDB-XC Sorbent Particles Life Sciences Environmental Basic Research 300 Summary Cartridge design promotes high retention of a wide range of analytes, reducing method development time and facilitating a generic approach to sample preparation High performance sorbents and 3M proprietary Empore membrane technology offers high recovery, superior clean-up, and cartridge-to-cartridge reproducibility Sorbent matrix promotes high retention of a wide range of analytes, reducing method development time and facilitating a generic approach to sample preparation Functional groups, such as octyl (C8) and octadecyl (C18), can be bonded to the silica surface to provide non polar interactions Each sorbent exhibits unique properties of retention and selectivity filter for a particular analyte Product Features We designed Empore™ Solid Phase Extraction Cartridges for sample pretreatment to remove or minimize sample matrix and other interferences to “clean-up” a sample prior to analysis. Our extraction cartridge incorporates C18 (Octadecyl) standard density sorbent particles with PTFE to create a mechanically stable sorbent disk secured in a syringe barrel. An Empore extraction disk is secured in place at the bottom of each cartridge with a sealing ring and a proprietary prefilter is placed above the Empore disk. This prefilter aids in preventing particulates and macromolecules from reaching the underlying membrane and improves the flow of biological samples, such as serum and plasma, through the cartridge. Empore™ Disk Cartridges are an innovative alternative to packed column technology. Each cartridge is molded from a polypropylene resin. The dense particle packing and uniform distribution within Empore disks offer outstanding sample preparation efficiency and reproducibility of results. Since the diffusion distance between particles is minimized, adsorption is more efficient, and extraction can be accomplished using low sorbent mass. Our Standard density (SD) membranes for all silica based sorbent chemistries allow reliable sample preparation for challenging sample matrices. The standard density membrane has been optimized for improved flow rates for samples processed in most bioanalytical applications. Our high density (HD) membrane formulation is effective for minimal elution volumes. The high density membranes are designed for maximum extraction efficiency with minimal elution volumes of samples that have less matrix interference. Empore membranes efficiently extract samples with no channeling. The small bed volume allows compound elution from Empore cartridges in as little as 100-200 µL of mobile phase or mobile phase compatible solutions. Solid Phase Extraction (SPE) is a procedure where an analyte is isolated and concentrated from a liquid sample. It is also described as a clean-up procedure that prepares the analyte prior to analysis so that the desired sensitivity range of an analytical method can be obtained. Analytes are isolated from complex mixtures by proper selection of a variety of sorbent chemistries (reversed phase, mixed phase, normal phase, and ion exchange). The analyte, or component itself, is the material or chemical element for which the analytical process is focused. Empore Solid Phase Extraction Products are intended for solid phase extraction during scientific research only. These products are not intended for use in medical devices or in assessment and treatment of clinical patients. Product Features Applications 279 Applying Empore™ E3technology™ to Proteomic Sample Preparation This note describes several applications of E3technology™ for proteomic sample preparation, which include two major components, protein... 278 Evaluation of Empore™ C18 Spin Columns for Peptide Desalting and Proteomic Analysis This application note describes evaluation of spin columns packed with C18 Empore™ membrane to load and desalt peptides for the purpose... 276 Rapid Determination of Strontium in Water Using Empore Strontium Disk This application note establishes a rapid analysis method for Strontiumin in water in emergency situations. The 1.00 L water sample was... 273 Empore 8270 Disk Extracts 125 Semi-volatile Organic Compounds from Water Samples per EPA 8270 The application note developed a new EPA 8270E method by using CDS Empore 8270 disk to maximizes the advantages of the membrane... 272 Eval. of Sample Loading Amount for 4 Types of StageTips on Total Number of Protein Identities The Empore™ StageTips product was developed utilizing the Empore™ membrane solid phase extraction (SPE) product to address the need for... 264 Extraction of Illicit Drugs from Wastewater using Empore Syringe-type Membrane SPE Cartridge 1 2 3 4 Applications Description Part Number Empore 4114HD: C8 bonded silica, 12um particle size. 4mm/1ml. 98-0604-0188-6 Empore 4114SD: C8 bonded silica, 50um particle size, 4mm/1ml. 98-0604-0191-0 Empore 4115SD: C18 bonded silica, 50um particle size. 4mm/1ml. 98-0604-0197-7 Empore 4215SD: C18 bonded silica, 50um particle size. 7mm/3ml. 98-0604-0198-5 Empore 4315SD: C18 bonded silica, 50um particle size. 10mm/6ml. 98-0604-0199-3 Empore 4340HD: SDB-XC high density polystyrenedivinylbenzene, 12um particle size. 10mm/6ml 98-0604-0203-3 Empore 4341HD: SDB-RPS high density, 12um particle size. 10mm/6ml 98-0604-0208-0 Parts & Options Downloads Marketing Brochures Empore Cartridge Brochure Request form for more information Thanks for contacting CDS! Our specialist will contact you soon. Send Downloads Empore Products Empore Disk 47 and 90 mm disks with C18, C8, SDB-XC, SDB-RPS, Oil & Grease and Activated Carbon Read More Empore Cartridge 1, 3, and 6 mL cartridges with minimum elution volume Read More Empore 96-well Plate 96-well plate with 1.2 and 2.5 ml well volume Read More Empore EZ-Trace Four channel high-throughput SPE equipment Read More Empore StageTips SPE Micropipette Tips with C18, C8, SDB-XC, SDB-RPS, SAX, SCX, Read More Empore Spin Column For small-volume desalting and fractionation of peptides and proteins Read More E3technology Efficient, effective, and economical approach for proteomics sample preparation (protein cleanup and digestion) with various format Read More