Dimension (W x H x D):
Up to 1300°C
0.01°C/ms to 20°C/ms
0.01°C/sec to 999.9°C/sec
0.01°C/min to 999.9°C/min
Yes, Up to 10 temperature profiles. Allows for multiple thermal desorption or pyrolysis steps on each sample
Heated Transfer line (up to 350°C)
381 mm X 292 mm X 406 mm
1/2" Coil Probe
1/4" Ribbon Probe
1/4" Coil Probe
FT-IR Probe (Brill Cell)
The CDS Model 6150 Pyroprobe is the basic model of CDS's 6th generation Pyroprobe. The 6150 is equipped with Drop-In-Sample-Chamber (DISC) technology with easy sample loading and 1.5% RSD. The system connects to any model GC with a heated sample line for easy on/off installation.
CDS DISC System
The 6150 is equipped with the revolutionary Drop In Sample Chamber (DISC) sample loading system. This system makes the loading of pyrolysis tubes a quick and trouble-free operation.
Easy Sample Prep
The DISC system is using a novel DISC tube to simplify the sample preparation process. No quartz wool is needed and the sample filling is as easy as dropping a straw into a drink.
The DISC system brings an amazing 1.5% RSD for 5 run pyrolysis of Polystyrene at 600 °C by holding 0.1 °C temperature accuracy and calibrated temperature precision.
The 6000 series Pyroprobe adopts the computer aided Finite Element Analysis in the sample pathway development. The system could reach C55 for pyrolyzing Polyethylene through GC with a single quad mass-spec.
Newly Designed Oven with High Temperature Valve
The newly designed valve oven guarantees the sample path is evenly heated without cold spots. A heating temperature of 350 °C assures minimal carry over.
Windows 10 Compatible Software
The 6th generation CDS Pyroprobe has completely redesigned software for modern PC systems. It is also backward compatible with Windows XP, Windows 7 and Windows 8.
Built-In Leak Check
This feature allows you to carry out pyrolysis studies with peace of mind. The self diagnosis capabilities can identify the leaking zones when attempting to trouble shoot the system.
Remote GC Start
The newly designed GC remote start board is capable to handle all GC start signals from any GC system in the world, including Agilent 8890 and Thermo 1310.
The 6150 is designed with quick access panels for easy diagnosis and quick exchange of parts to minimize instrument downtime.
Touch Screen Interface
The CDS 6200 Pyroprobe has the industry leading user interface through a high resolution 4.5" touch screen.
The 6150 comes with a Multi-Purpose Rail Mount (MPRM) to allow easy mounting of optional accessory modules, such as the Autosampler, 1/2" manual probe and 1//4" ribbon probe.
The CDS library has 500+ industry standard polymers and 500+ polymer additives. This powerful library helps to address the need to identify unknown compounds from pyrolysis.
Max Temperature Ramp Rate
RSD % (Polystyrene)
Yes, Up to 10 Steps
Quartz DISC Tube
Direct GC Mount